1. Bakeng sa ho thibela meteo ho tiisa manonyeletso a marako a likharetene,facademanonyeletso le tsamaiso;
2.Ho tiisa boemo ba leholimo ka tšepe(ho sa kenyeletsoe koporo), khalase, lejoe, phanele ea aluminium, le polasetiki;
3.Ho khomarela ka mokhoa o babatsehang ho thepa e tloaelehileng ea mohaho.
1. Karolo e le 'ngoe, e sa nke lehlakore-e folisoa ka ho khomarela hantle, boemo ba leholimo le elasticity bakeng sa ho tiisa boemo ba leholimo ka likharetene le li-facade tsa mohaho;
2. Boemo ba leholimo bo botle haholo le ho hanyetsa mahlaseli a kotsi a ultraviolet, mocheso le mongobo, ozone le mocheso o feteletseng;
3. Ka ho khomarela hantle le ho lumellana le lisebelisoa tse ngata tsa mohaho;
4. Lula u feto-fetoha le maemo ho feta mocheso oa -400C ho isa ho 1500C;
5. E khona ho nka katoloso, compression, transverse le longitudinal metsamao.
1. Hloekisa ka li-solvents tse kang toluene kapa acetone ho boloka libaka tsa substrate li hloekile ka ho feletseng li bile li omme;
2. Primer hangata ha e hlokehe libakeng tse se nang masoba, empa mohlomong hoa hlokahala bakeng sa ho tiisa hantle ha libaka tse itseng tse nang le masoba.
3. Bakeng sa ponahalo e ntle, koahela ka ntle ho libaka tse kopanetsoeng ka lipompo tsa masking pele ho kopo;
4. Khaola nozzle ka boholo bo lakatsehang le extrudes sealant libakeng tse kopanetsoeng;
5. Sesebelisoa hang ka mor'a kopo ea sealant le ho tlosa masking theipi pele ho matlalo a sealant;
1. Ha e tšoanelehe bakeng sa sekhomaretsi sa lerako la sebopeho sa lerako;
2. Ha e tšoanelehe bakeng sa sebaka se se nang moea, hobane ho hlokahala ho monya mongobo moeeng ho phekola sealant;
3. Ha e tšoanelehe bakeng sa sebaka se batang kapa se mongobo;
4. Ha e tšoanelehe bakeng sa sebaka se lulang se le mongobo;
5. E ke ke ea sebelisoa haeba mocheso o ka tlase ho 4 ° C kapa ka holimo ho 50 ° C holim'a thepa.
Warranty Nako :Likhoeli tse 12 haeba u lula u tiisa, 'me u bolokoe ka tlase ho 27℃ sebakeng se phodileng, se omileng ka mor'a letsatsi la tlhahiso.
Bolumo:300ml
Lintlha tse latelang ke tsa sepheo sa litšupiso feela, ha lia rereloa ho sebelisoa ho hlophisa lintlha.
Mohaho oa Mohaho oa OLV7000 Silicone Silicone | ||||
Tshebetso | Standard | Boleng bo Lekanyelitsoeng | Mokhoa oa ho Leka | |
Teko ho 50±5% RH le mocheso 23±2℃: | ||||
Botenya(g/cm3) | ±0.1 | 1.50 | GB/T 13477 | |
Nako ea ho Hloka Letlalo(min) | ≤180 | 20 | GB/T 13477 | |
Extrusion(ml/mots) | ≥150 | 300 | GB/T 13477 | |
Tensile Modulus (Mpa) | 23 ℃ | ﹥0.4 | 0.65 | GB/T 13477 |
-20 ℃ | kapa ﹥0.6 | / | ||
Slumpability (mm) e otlolohileng | eseng ho fetola sebopeho | eseng ho fetola sebopeho | GB/T 13477 | |
Slumpability (mm) e rapameng | ≤3 | 0 | GB/T 13477 | |
Ho Phekola Lebelo(mm/d) | 2 | 3.0 | / | |
Joalo ka Phekolo -Kamora matsatsi a 21 ho 50±5% RH le mocheso oa 23±2℃: | ||||
Ho thatafala(Shore A) | 20-60 | 42 | GB/T 531 | |
Matla a Tensile tlas'a Maemo a Tloaelehileng(Mpa) | / | 0.8 | GB/T 13477 | |
Elongation of Rupture(%) | / | 300 | GB/T 13477 | |
Bokhoni ba ho Tsamaea (%) | 25 | 35 | GB/T 13477 | |
Polokelo | 12Likhoeli |