Mohaho oa Moaho oa OLV4800 Silicone Silicone
1. Setsebi se sebelisetsoang lerako la lerako le se nang sebopeho le ho tiisoa ha docking, ho kenyeletsoa khalase, poleiti ea aluminium, poleiti ea polasetiki ea aluminium, 'mele oa sebopeho sa tšepe le tse ling tse phahameng tsa lerako ho tiisa lerako la leholimo.
2. Ho tiisa boemo ba leholimo ka tšepe (ho sa kenyelelitsoe koporo), khalase, lejoe, phanele ea aluminium le polasetiki
3. Ho tiisa ka kopanelo le litlhoko tsa polokeho ea ho tiisa merero e mengata.
1. Karolo e le 'ngoe, e sa nke lehlakore-e folisoa ka ho khomarela hantle, boemo ba leholimo le elasticity bakeng sa ho tiisa boemo ba leholimo ka likharetene le li-facade tsa mohaho;
2. Boemo ba leholimo bo botle haholo le ho hanyetsa mahlaseli a kotsi a ultraviolet, mocheso le mongobo, ozone le mocheso o feteletseng;
3. Ka ho khomarela hantle le ho lumellana le lisebelisoa tse ngata tsa mohaho;
4. Lula u feto-fetoha le maemo ho feta mocheso oa -400C ho isa ho 1500C;
5. E hanana le maemo a matla a tikoloho joalo ka ho kenela moea, pula e tsamaisoang ke moea, lehloa le lehloa.
1. Hloekisa ka li-solvents tse kang toluene kapa acetone ho boloka libaka tsa substrate li hloekile ka ho feletseng li bile li omme;
2. Bakeng sa ponahalo e ntle, koahela ka ntle ho libaka tse kopantsoeng ka lipompo tsa masking pele ho kopo;
3. Khaola nozzle ka boholo bo lakatsehang le extrudes sealant libakeng tse kopanetsoeng;
4. Sesebelisoa hang ka mor'a kopo ea sealant le ho tlosa masking tape pele ho matlalo a sealant.
1. Hloekisa ka li-solvents tse kang toluene kapa acetone ho boloka libaka tsa substrate li hloekile ka ho feletseng li bile li omme;
2. Bakeng sa ponahalo e ntle, koahela ka ntle ho libaka tse kopantsoeng ka lipompo tsa masking pele ho kopo;
3. Khaola nozzle ka boholo bo lakatsehang le extrudes sealant libakeng tse kopanetsoeng;
4. Sesebelisoa hang ka mor'a kopo ea sealant le ho tlosa masking theipi pele ho matlalo a sealant;
5. Sehlahisoa sa ho tiisa boemo ba leholimo ba maemo a holimo se etselitsoeng ka ho khetheha bakeng sa glazing e akaretsang le ho tiisa boemo ba leholimo leboteng la likharetene le li-facade tsa moaho.
Shelf bophelo: 12likhoeliif lula e tiisa, 'me e bolokoe ka tlase ho 270C ho pholile,dsebaka ka mora letsatsi la tlhahiso.
Tloaelo:GB/T 14683-I-Gw-50HM
Bolumo:300ml
Lintlha tse latelang ke tsa sepheo sa litšupiso feela, ha lia rereloa ho sebelisoa ho hlophisa lintlha.
| Mohaho oa Moaho oa OLV4800 Silicone Silicone | ||||
| Tshebetso | Standard | Boleng bo Lekanyelitsoeng | Mokhoa oa ho Leka | |
| Teko ho 50±5% RH le mocheso 23±2℃: | ||||
| Boima ba 'mele (g/cm3) | ±0.1 | 1.37 | GB/T 13477 | |
| Nako ea ho se Na Letlalo (mets) | ≤180 | 20 | GB/T 13477 | |
| Extrusion (ml/min) | ≥150 | 350 | GB/T 13477 | |
| Tensile Modulus (Mpa) | 23 ℃ | ﹥0.4 | 0.52 | GB/T 13477 |
| -20 ℃ | or ﹥0.6 | / | ||
| Slumpability (mm) e otlolohileng | eseng ho fetola sebopeho | eseng ho fetola sebopeho | GB/T 13477 | |
| Slumpability (mm) e rapameng | ≤3 | 0 | GB/T 13477 | |
| Lebelo la ho folisa (mm/d) | 2 | 3.5 | / | |
| Joalo ka Phekolo -Kamora matsatsi a 21 ho 50±5% RH le mocheso oa 23±2℃: | ||||
| Ho thatafala (Lebopo A) | 20-60 | 35 | GB/T 531 | |
| Tensile Strength Under Standard Conditions (Mpa) | / | 0.6 | GB/T 13477 | |
| Elongation of Rupture (%) | / | 400 | GB/T 13477 | |
| Bokhoni ba ho Tsamaea (%) | 25 | 50 | GB/T 13477 | |
| Polokelo | Likhoeli tse 12 | |||
-
Mohala
-
Mohala
-
E-mail
-
skype
-
WeChat
WeChat
-
Holimo
