1. Ke bakeng sa tšebeliso e khethehileng bakeng sa lap joint le empa kopanelo tiisoa bakeng sa acrylic panel le bao e seng sebopeho khalase kharetene lerako;
2. Ka ho tiisoa ha kopanelo ea lerako le fapaneng la aluminium le aluminium lakane ea lesira le joalo-joalo;
3. Ho tiisa ka kopanelo ea konkreite, lithaele, lirafshoa, lipolasetiki le litšepe tsa poleiti;
4. Le tse ling tse kaho tiisoa.
1. Karolo e le 'ngoe, e sa nke lehlakore-e folisoa ka ho khomarela hantle, boemo ba leholimo le elasticity bakeng sa ho tiisa boemo ba leholimo ka likharetene le li-facade tsa mohaho;
2. Boemo ba leholimo bo botle haholo le ho hanyetsa mahlaseli a kotsi a ultraviolet, mocheso le mongobo, ozone le mocheso o feteletseng;
3. Ka ho khomarela hantle le ho lumellana le lisebelisoa tse ngata tsa mohaho;
4. Lula u tenyetseha ho feta mocheso oa -400C ho isa ho 1500C.
1. Hloekisa ka li-solvents tse kang toluene kapa acetone ho boloka libaka tsa substrate li hloekile ka ho feletseng li bile li omme;
2. Bakeng sa ponahalo e ntle, koahela ka ntle ho libaka tse kopantsoeng ka lipompo tsa masking pele ho kopo;
3. Khaola nozzle ka boholo bo lakatsehang le extrudes sealant libakeng tse kopanetsoeng;
4. Sesebelisoa hang ka mor'a kopo ea sealant le ho tlosa masking tape pele ho matlalo a sealant.
1.Ha e tšoanelehe bakeng sa sekhomaretsi sa lerako la sebopeho;
2.Ha e tšoanelehe bakeng sa sebaka se se nang moea, hobane ho hlokahala ho monya mongobo moeeng ho phekola sealant;
3.Ha e tšoanelehe bakeng sa sebaka se batang kapa se mongobo;
4.Ha e tšoanelehe bakeng sa sebaka se lulang se le mongobo;
5.E ke ke ea sebelisoa haeba mocheso o ka tlase ho 4°C kapa ka holimo ho 50°C holim'a thepa.
Shelf bophelo: 12likhoeliif lula e tiisa, 'me e bolokoe ka tlase ho 270C ho pholile,dsebaka ka mora letsatsi la tlhahiso.
Bolumo:300ml
Lintlha tse latelang ke tsa sepheo sa litšupiso feela, ha lia rereloa ho sebelisoa ho hlophisa lintlha.
OLV4900 Low Modulus High Movement e thibelang boemo ba leholimo Silicone Sealant | |||||
Tshebetso | Standard | Boleng bo Lekanyelitsoeng | Mokhoa oa ho Leka | ||
Teko ho 50±5% RH le mocheso 23±2℃: | |||||
Boima ba 'mele (g/cm3) | 1.3-1.4 | 1.35 | GB/T 13477.2-2002 | ||
Nako e Se nang Letlalo (metsotso) 25℃,50%RH | ≤60 | 15 | GB/T 13477.2-2002 | ||
Extrusion (g/5s) | 8-25 | 10 | GB/T 13477.4-2002,0.4MPa,25℃,3mm | ||
Slumpability (mm) e otlolohileng 50±2℃ | ≤3 | 0 | GB/T 13477.6-2002 | ||
Slumpability (mm) e rapameng 50±2℃ | ≤3 | 0 | GB/T 13477.6-2002 | ||
Lebelo la ho folisa (mm/24h) | 3-5 | 3.5 | / | ||
Joalo ka Phekolo -Kamora matsatsi a 21 ho 50±5% RH le mocheso oa 23±2℃: | |||||
Tensile Adhesive Strength (Mpa) 23℃ | 》0.6 | 0.6 | GB/T 13477.10-2017 | ||
Sebaka se hlolehang sa ho khomarela %23℃ | ≤5 | 0 | |||
Elongation of Rupture (%) | 》400 | 600 | GB/T 13477.10-2017 | ||
Ho thatafala (Lebopo A) | 20-40 | 22 | T/FSI 015-2019 4.3.4 | ||
Tahlehelo e Seng (%) | ≤8 | 2.93 | GB/T 13477.19-2017 | ||
Sekhahla sa ho Khutlisa ka Matla (%) | 》70 | 87 | GB/T 13477.17-2017 | ||
Matla a ho lla (KN/m) | 》4 | 4.2 | GB/T 529-2017 | ||
Tensile Strength Under Standard Conditions (Mpa) | / | 0.6 | GB/T 13477 | ||
Bokhoni ba ho Tsamaea (%) | / | +100, -50 | |||
Polokelo | Likhoeli tse 12 |